IBM FlashSystem 840, Руководство по установке

Страница: 52 / 78

v
You must have the IP network address that you will use to manage the
system.
– IP address
– Subnet mask
– Gateway
v
Other information is optional, but useful for enabling more capabilities.
– The IP address of a Network Time Protocol (NTP) server for automated
setting of date and time
– The IP address of a simple mail transfer protocol (SMTP) server for
sending automated notifications of alerts. When this Call Home feature is
enabled, the system notifies IBM of system health and failures.
2. Locate the three USB flash drives that were included with your order in the
documentation package.
Note: If you purchased an encryption license for your system, three USB
flash drives are included with your system. All three USB flash drives contain
the initialization tool and a script that is used to generate the encryption key.
3. Insert the USB flash drive into a USB port on the computer.
4. Open a terminal window.
5. Locate the root directory of the USB flash drive. It is usually located in the
/media/
directory. If an automatic mount system is used, the root directory
can be located by typing the
mount
command.
6.
Type:
sh InitTool.sh
The initialization tool wizard starts.
7. On the Tasks page, select Yes to configure a new system. If you already
initialized the system but are unable to access it, select No . If you select No ,
more options become available.
8. On the Encryption page, select Yes to indicate that you purchased a license to
activate encryption for the system.
9. On the Management IP page, enter the IP address , Subnet mask , and
Gateway information. Click Apply and Next .
10. Before you proceed, ensure that the system is powered on.
11. Remove the USB flash drive from the computer. Insert the USB drive into the
port on the left canister to allow the system to initialize. Figure 13 shows the
locations of the USB ports.
1
,
2
USB ports
2 1
tms00033
Figure 13. USB ports
30
FlashSystem 840: Installation Guide