IBM FlashSystem 840, Руководство по установке

Страница: 32 / 78

In each box, locate the packing slip. Verify that the items listed in the packing slip
match what is in the box, and that any optional items that you ordered are
included. Depending on your order, your shipment might contain extra items.
__
v
Enclosure
__
v
Two power cables
__
v
Rail kit and screws
__ v Two battery modules
__
v
Installation poster
__ v Publications package. This package includes documentation and a USB flash
drive used to initialize the system. Additional USB drives are included if the
optional encryption feature is purchased.
__
v
Network cables
Your system might include other items, including SFP transceivers.
Installing the hardware
Learn how to set up the rails, install the system hardware, connect the cables and
power on the system.
Installing the support rails for the storage enclosure
Before you install the storage enclosure, you must first install the support rails.
Procedure
To install the support rails, complete the following steps.
1.
Locate the rack mounting rails and screws (Figure 1). The rail assembly
consists of two rails that must be installed in the rack cabinet.
2. Your rack mounting rails may include a u-shaped bolt, which is shown in
Figure 1, that must be removed before installing the rails. If this u-bolt is
present, remove the u-bolt by removing the two nuts that secure the bolt to
the rail.
v3500168
Figure 1. Rack mounting rails and screws
10
FlashSystem 840: Installation Guide