IBM FlashSystem 820, Руководство пользователя

Страница: 23 / 38

Procedure
1.
To make logical units accessible to connected servers, link the logical unit to the storage system Fibre
Channel port or the InfiniBand port. In the web interface system tree, click the
Logical Unit node.
2. Click Access on the Logical Unit Overview pane to start the Access Policy wizard.
3. In the Modify Access Policies pane, select the policy node that you want from the Available tree, and
then click the >> button to move the policy to the Assigned tree.
4. When you finish making policy changes, click Next to continue to the modifications review page.
5. Click the Confirm check box and click Finish to exit the wizard and to commit the policy changes.
Setting the system date and time
Learn how to set the date and time on your storage system.
About this task
If you want set the date and time, complete the following steps:
Procedure
1. From the web interface, select the Management node in the system tree.
2. Select the Date/Time node. This action displays the current date and time and the length of time that
the system has been running.
3.
If the date and time are incorrect, set them manually. Either use the right mouse button to click the
Date/Time
node and select
Date/time configuration
, or use the left mouse button to click the wrench
icon in the button bar. Both methods start the
Date/Time
configuration wizard.
4. Follow the instructions in the wizard to configure the date and time, or specify a Network Time
Protocol (NTP) server to supply this information automatically.
Setting up the call home function
Use the call home function to set up your storage system to automatically send prefailure or failure
notifications to the IBM Troubleshooting Ticketing system in the IBM Service Center.
You can also set up call home to automatically send alerts directly to you. Call home cannot accept
incoming communication, which means that the IBM Service Center cannot contact the storage system by
using call home.
When certain events occur in the system, call home sends a notification to the IBM Service Center. After
you receive the notification, IBM service personnel analyze the problem promptly and take appropriate
action. If the problem requires service, an IBM service representative is sent to your site with any
necessary replacement parts. With access to the storage system, IBM service personnel can complete
service tasks, such as viewing error logs or initiating trace and dump retrievals.
Call home notifications are sent through email from a simple mail transport protocol (SMTP) server. The
storage system's Mail Service function is used by the system to send outgoing call-home emails to IBM.
Note: You must configure the SMTP email system by using the mail service function to enable the system
to send outgoing emails for the call home function. (See “Configuring the mail service” on page 12. The
email configuration rules must not inhibit call home emails from being sent in real time. Emails with
Importance
or
X-Priority
in the email header must not be delayed. For example, system emails must not
be placed in a queue for later delivery or filtered for priority.
Installing the IBM FlashSystem 820
11