![background image](http://html1.mh-extra.com/html/ibm/flashsystem-820/flashsystem-820_manual_3347820022.webp)
Procedure
1.
Using a web browser that can run Java
™
, enter the system IP address as
http://xxx.xxx.xxx.xxx
. The
System Login pane is shown. The storage system is initially configured with a default admin user
defined as
User: admin
and
Password: password
.
2.
Log in to the system. The Web Interface Opening pane is shown.
3.
To work with the web interface, you can expand or select the storage system icon in the system tree.
Configuring the controllers
Learn to use the web interface to configure the controllers.
Procedure
1.
In the web interface system tree, click the
Interfaces
node to view the Interfaces Overview pane. A
table of all Fibre Channel and InfiniBand controller ports is shown.
2.
Select the controller port, and click
Configure
on the overview pane toolbar. The Controller Channel
Configuration pane is shown.
3.
Select the topology and link speed appropriate for your network, and assign a loop ID.
4.
Repeat steps 2 and 3 for each controller port in the system.
Creating and configuring LUNs
Learn how to create and configure logical unit numbers (LUNs).
Creating LUNs
Learn how to create logical unit numbers (LUNs).
About this task
Important:
For specific operating system and application optimizations for LUNs, see the storage system
Integration Guide
.
To create a logical unit, complete the following steps:
Procedure
1.
In the web interface system tree, right-click the
Logical Units
tree node and select
Create
. A wizard
opens to guide you through the logical unit creation process.
2.
After you read the wizard overview, click
Next
to set the logical unit parameters.
3.
After you set the appropriate values, click
Next
. A final pane confirms the values.
4.
After you click
Finish
, the logical unit is created.
Results
Before the LUN can be used, you must define an access policy.
Configuring access policies for the LUNs
Learn how to configure access policies for the logical unit numbers (LUNs).
About this task
To add an access policy to a new LUN, complete the following steps:
10
IBM FlashSystem: Installing the IBM FlashSystem 820
Содержание FlashSystem 820
