IBM FC EJ05 Скачать руководство пользователя страница 57

Страница: 57 / 66

Vendor software
The IBM Power Systems servers include certain vendor software that is not covered under the IBM

license agreement. IBM makes no representation about the accessibility features of these products.

Contact the vendor for accessibility information about its products.

Related accessibility information
In addition to standard IBM help desk and support websites, IBM has a TTY telephone service for use by

deaf or hard of hearing customers to access sales and support services:

TTY service

800-IBM-3383 (800-426-3383)

(within North America)

For more information about the commitment that IBM has to accessibility, see IBM Accessibility

(www.ibm.com/able).

Privacy policy considerations

IBM Software products, including software as a service solutions, (“Software Offerings”) may use cookies

or other technologies to collect product usage information, to help improve the end user experience, to

tailor interactions with the end user, or for other purposes. In many cases no personally identifiable

information is collected by the Software Offerings. Some of our Software Offerings can help enable you to

collect personally identifiable information. If this Software Offering uses cookies to collect personally

identifiable information, specific information about this offering’s use of cookies is set forth below.
This Software Offering does not use cookies or other technologies to collect personally identifiable

information.
If the configurations deployed for this Software Offering provide you as the customer the ability to collect

personally identifiable information from end users via cookies and other technologies, you should seek

your own legal advice about any laws applicable to such data collection, including any requirements for

notice and consent.
For more information about the use of various technologies, including cookies, for these purposes, see

IBM’s Privacy Policy at http://www.ibm.com/privacy and IBM’s Online Privacy Statement at http://

www.ibm.com/privacy/details the section entitled “Cookies, Web Beacons and Other Technologies” and

the “IBM Software Products and Software-as-a-Service Privacy Statement” at http://www.ibm.com/

software/info/product-privacy.

Trademarks

IBM, the IBM logo, and ibm.com

are trademarks or registered trademarks of International Business

Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be

trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at

Copyright and trademark information.
The registered trademark Linux is used pursuant to a sublicense from the Linux Foundation, the exclusive

licensee of Linus Torvalds, owner of the mark on a worldwide basis.

Electronic emission notices

Class A Notices

The following Class A statements apply to the IBM servers that contain the POWER9 processor and its

features unless designated as electromagnetic compatibility (EMC) Class B in the feature information.

Notices 43

Содержание FC EJ05



































































Результаты поиска

Содержание FC EJ05

Отзывы:

Похожие инструкции для FC EJ05

Бренды по названию

Популярные бренды

IBM FC EJ05, Руководство пользователя

Результаты поиска

Содержание FC EJ05

Отзывы:

Похожие инструкции для FC EJ05

Бренды по названию

Популярные бренды