![background image](http://html1.mh-extra.com/html/ibm/exn4000/exn4000_installation-and-setup-instructions_3853740016.webp)
Cabling the EXN4000
Use these instructions to cable the EXN4000.
About this task
Cable the first expansion unit (for example, ID=x=1) controller A Output port
module to the second expansion unit ( ID=x+1=2) controller A module Input port.
Repeat as necessary to attach a third expansion unit ( ID=x+2=3) to the second
expansion unit.
For dual node connection, cable the expansion unit controller B Output port
module to the expansion unit controller B module Input port. Repeat as needed.
Make sure that the cables are secure.
Note:
1.
To cable your expansion unit to an N series storage system, refer to the
Installation and Setup Instructions
for the N series storage system to which you
are connecting the EXN4000.
2.
For information about dual-path Fibre Channel cabling, refer to the
Installation
and Setup Instructions
for the N series storage system to which you are
connecting the EXN4000.
Booting the system
See the
Installation and Setup Instructions
that came with your N series storage
system for instructions on booting your storage system for the first time.
About this task
See the
Data ONTAP Software Setup Guide
for the setup worksheet and other setup
information.
Out
In
Out
In
B
A
Out
In
Out
In
B
A
Out
In
Out
In
B
A
2
3
4
1
exn40007
Figure 9. Cabling the EXN4000
8
Содержание EXN4000
