IBM EtherJet 10BASE-T ISA Adapter, Руководство пользователя

Страница: 50 / 109

9
Restart the server by entering server. Indicators that show you
installation is successful are listed here:
Ÿ
Messages indicating that the LAN driver, IBMEINWS.LAN
and the NetWare modules (.NLM files) have been installed.
Ÿ
LEDs on the card show normal operation. (See “The
LEDs” on page A-1.)
Ÿ
You can log on and communicate with the network.
Table 6-4 describes the LAN driver parameters.
Table 6-4 (Page 1 of 2). LAN Driver Parameters
Parameter Explanation
FRAME This parameter indicates the frame type to be used by the
LAN driver and network adapter.
Default value: Ethernet_802.2
Valid values: Ethernet_802.2, Ethernet_802.3, Ethernet_II,
Ethernet_SNAP
NODE Use this parameter to specify a locally administered address
for the EtherJet ISA Adapter. The adapter can be known on
the network by its universally administered address (the
address encoded in the adapter memory at the factory) or a
locally administered address (a unique, user-assigned
address).
The universally administered address appears on a label on
the EtherJet ISA Adapter bracket (see Figure 5-1 on
page 5-2).
The value of the locally administered address must be
unique among the addresses on the network and contain 12
hexadecimal digits.
Default value: Universally administered address
Valid values: x2xxxxxxxxxx, x6xxxxxxxxxx, xAxxxxxxxxxx,
or xExxxxxxxxxx immediately followed by L. For
example:
A6987654321ðL
Chapter 6. Installing the Device Drivers for Your Network Environment
6-13
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21