IBM ESS 3000, Руководство по планированию и установке оборудования

Страница: 55 / 108

Table 18. Selecting bracket pins for your rack
Mounting holes Bracket pins
Round,
unthreaded
Use the pre-installed medium pins.
Square Unscrew the medium pins and replace with the large pins that are supplied with
the rails.
4. At each end of the rail, grasp the tab 1 and pull firmly to open the hinge bracket.
(See Figure 19 on page 43.)
Figure 19. Opening the hinge brackets
5. Align the holes in the rail bracket with the holes on the front and rear rack cabinet flanges.
Ensure that the rails are aligned on the inside of the rack cabinet.
6. On the rear of the rail, press the two bracket pins into the holes in the rack flanges.
7. Close the rear hinge bracket to secure the rail to the rack cabinet flange.
(See Figure 20 on page 43.)
Figure 20. Closing the hinge brackets
8. On the front of the rail, press the two bracket pins into the holes in the rack flanges.
9. Close the front hinge bracket to secure the rail to the rack cabinet flange.
Chapter 4. Installing 43