IBM eServer xSeries 226 Type 8648, Руководство по установке опций

Страница: 52 / 76

Complete the following steps to replace a hot-swap power supply:
1. Review the safety information beginning on page v and “Installation guidelines”
on page 7.
2. Press the orange release lever on the selected power supply; then, pull the
power supply out of the bay and set it aside.
Power supply
AC power
LED (green)
DC power
LED (green)
Handle
(open position)
3. Make sure the power-supply handle is in the open position; then, slide the
power supply all the way into the chassis before placing the power-supply
handle into the locked position.
4. If the server is not on, turn on the server.
40
xSeries 226 Type 8648: Option Installation Guide