IBM eServer iSeries 825, Руководство по установке

Страница: 24 / 62

__ 5. Repeat the steps to remove the other power supply.
Electrostatic discharge
Attach the disposable wrist strap to prevent electrostatic discharge from damaging a device. View
video. Attach the adhesive part of the foil to an unpainted surface on the frame of the unit.
Notes:
1. Follow the same precautions you would use without the wrist strap. The 2209 Disposable Wrist Strap
is for static control. It will not increase or decrease your risk of receiving electric shock when using or
working on electrical equipment.
2. Remove the liner from the copper foil at the end when you unroll the strap.
3.
Attach the copper foil to an
exposed, unpainted
metal surface on the frame of the unit (electrical
ground).
4. Place devices that you remove in electrostatic discharge bags to prevent damage.
Remove disk units
__ 1. The disk units are located in the front of your system unit.
__ 2. It is very important to label the disk units and locations as you remove them so they are later
installed in the exact same position. For example, D01. Remove D01 first.
18
Model 825 In Rack Installation Instructions V5R3