IBM eserver iSeries 270, Руководство по установке

Страница: 19 / 40

__ 2. Remove the blank filler cards from the next available positions by doing the
following:
__ a. Push outward on the latches
A
that are located at each end of the
filler card, Figure 14 on page 16.
__ b.
Remove the filler card from the card socket and discard it.
__ 3. Find the package that contains the new memory cards.
__ 4. Attention: Memory cards are fragile. Handle with care.
Remove a memory card, one at a time , from the static protective package.
__ 5. Refer to Figure 14 on page 16 to install the memory card by doing the
following:
__ a. Look carefully at the notches on the bottom of the memory card. The
distance between the notches and the end of the memory card is
slightly different.
__ b.
Align the card as shown in Figure 14 on page 16.
__ c. Match the keyed notches and push down on the card until the latches
close.
Figure 13. Memory Locations on Card Assembly
Install memory
15