IBM eServer BladeCenter HS20Type 8832, Инструкция по установке и эксплуатации, Страница: 73 / 112

POST error messages
The following table provides an abbreviated list of the error messages that might
appear during POST. See “Diagnostics” in the blade server Hardware Maintenance
Manual and Troubleshooting Guide on the IBM BladeCenter Documentation CD or
the IBM BladeCenter T Documentation CD that comes with the blade server for
more information about the POST error messages.
Table 3. Abbreviated list of POST error messages
POST message Failing device or problem found Suggested action
161 The real-time clock battery has failed. Replace the battery yourself or call for service.
162 A device configuration has changed. Make sure that your optional devices are turned on and
installed correctly.
Note: If you are unable to start the Configuration/Setup
Utility program, view the system event log in the
management module.
163 The time of day has not been set. Set the correct date and time.
289 A failing DIMM was disabled. Make sure that the memory is correct for your blade
server and that it is installed properly.
301
303
Keyboard and keyboard controller
v
Make sure that the keyboard/mouse/video select button
LED on the front of the blade server is lit, indicating
that the blade server is connected to the shared
keyboard.
v Make sure that the keyboard cable is connected to the
BladeCenter unit and nothing is resting on the
keyboard keys.
962 Parallel port configuration error Start the Configuration/Setup Utility program and make
sure that the parallel-port setting is correct.
11 xx Serial port error Make sure that the serial cable is connected correctly.
1162 Serial port configuration conflict Start the Configuration/Setup Utility program and make
sure that the IRQ and I/O port assignments needed by the
serial port are available.
1800 PCI adapter hardware interrupt Start the Configuration/Setup Utility program and make
sure that the interrupt resource settings are correct.
2400
2462
Video controller and memory
v Make sure that the keyboard/mouse/video select button
LED on the front of the blade server is lit, indicating
that the blade server is connected to the shared
monitor.
v Make sure that the monitor is connected correctly to
the BladeCenter unit.
00019 xxx Processor x is not functioning or
failed the built-in test.
Make sure that processor x is installed correctly. If the
problem remains, replace processor x .
00180 xxx A PCI adapter requested a resource
that is not available.
Start the Configuration/Setup Utility program and make
sure that the resources needed by the PCI adapter are
available.
01295085 The blade server failed the
ECC-checking hardware test.
Have the system board serviced.
012980 xx
012981 xx
Data for processor x Download and install the latest level of BIOS code.
01298200 Microprocessor speed mismatch Install microprocessors with identical speeds.
Chapter 6. Solving problems
59