IBM E02HRLL-G - WebSphere Partner Gateway Express, Руководство администратора

Страница: 87 / 268

Chapter 8. Support for IPv6
Internet Protocol version 6 (IPv6) is an extension over the current IPv4 protocol.
IPv6 features support for 128 bit address as opposed to the 32 bit address
supported by IPv4. Except the change in address format, no other configuration
changes are required for IPv6 in the Community Console.
The difference between IPv4 and IPv6 configuration is a change in IP address or
URL format.
v
If you are using the IPv4 protocol then write the address as in this example:
9.183.12.12
.
v
If you are using the IPv6 protocol then write the IP in brackets (’[ ’and ’]’) as in
this example:
[0::9.183.12.12]
v
If you are using the IPv6 protocol and an HTTP address then write the IP within
the square brackets (’[’ and ’]’) as in this example:
http://
[::FFFF:129.144.52.38]:80/index.htm
v
If it is IPv6 and FTP address then write the IP within the square brackets (’[’ and
’]’), as in this example:
ftp://[::FFFF:129.144.52.38]:80/index.htm
Enabling tunneling IPv6 over IPv4
The IPv6 protocol cannot be used throughout the entire Internet so you must
encapsulate IPv6 packets within IPv4 and
″
tunnel
″
through networks where only
IPv4 is available.
RHEL Linux 3
About this task
To enable tunneling on an RHEL Linux 3 platform, follow the steps below:
1. Login as the Root user.
2. Add the line
add - NETWORKING_IPV6=yes
to the file
etc/sysconfig/network
.
3.
Save the file and exit.
4. Add the following lines to the file
etc/sysconfig/network-scripts/ifcfg-
eth0
.
a. add - IPV6INIT=yes
b.
add - IPV6TO4INIT=yes
5. Save the file and exit.
6. Issue
ifconfig
from the command prompt.
The system automatically generates an IPv6 address. Use this address for
configuring receivers and destinations in WebSphere Partner Gateway.
Windows 2003/XP
To configure IPv6 on a Windows 2003/XP system, follow the Microsoft guidelines
at http://www.microsoft.com/windowsserver2003/techinfo/overview/
ipv6faq.mspx. If you are operating on a IPv6 supported Windows platform consult
your system administrator to enable the tunneling feature.
© Copyright IBM Corp. 2007, 2008
81