manualshive.com logo in svg

IBM DTLA-305040 - Deskstar 41.1 GB Hard Drive, Технические характеристики

Жесткий диск IBM DTLA-305040 Deskstar объемом 41.1 ГБ имеет высокие технические характеристики. Вы можете бесплатно скачать руководство по использованию с данного manualshive.com, чтобы узнать подробные спецификации данного продукта. Надежное устройство для хранения данных с быстрым доступом.

Поделиться
Скачать
background image

10.4 Overlapped and queued feature

Overlap allows devices to perform a bus release so that the other device on the bus may be used. To
perform a bus release the device clears both DRQ and BSY to zero. When selecting the other device
during overlapped operations, the host shall disable interrupts via the nIEN bit on the currently selected
device before writing the Device/Head register to select the other device.

The only commands that may be overlapped are

('CC'h)

Write DMA Queued

('A2'h)

Service

('C7'h)

Read DMA Queued

('00'h)

NOP (with 01h subcommand code)

For the READ DMA QUEUED and WRITE DMA QUEUED commands, the device may or may not per-
form a bus release. If the device is ready to complete the execution of the command, it may complete the
command immediately. If the device is not ready to complete the execution of the command, the device
may perform a bus release and complete the command via a service request.

Command queuing allows the host to issue concurrent commands to the same device. Only commands
included in the overlapped feature set may be queued. If a queue exists when a non-queued command is
received, the nonqueued command shall be aborted and the commands in the queue shall be discarded.
The ending status shall be ABORT command and the results are indeterminate.

The maximum queue depth supported by a device is indicated in word 73 of Identify Device information.

A queued command shall have a Tag provided by the host in the Sector Count register to uniquely iden-
tify the command. When the device restores register parameters during the execution of the SERVICE
command, this Tag shall be restored so that the host may identify the command for which status is being
presented. If a queued command is issued with a Tag value that is identical to the Tag value for a com-
mand already in the queue, the entire queue is aborted including the new command. The ending status is
ABORT command and the results are indeterminate. If any error occurs, the command queue is aborted.

When the device is ready to continue processing a bus released command and BSY and DRQ are both
cleared to zero, the device requests service by setting SERV to one, setting a pending interrupt, and
asserting INTRQ if selected and if nIEN is cleared to zero. SERV shall remain set until all commands
ready for service have been serviced. The pending interrupt shall be cleared and INTRQ negated by a
Status register read or a write to the Command register.

When the device is ready to continue processing a bus released command and BSY or DRQ is set to one
(i.e., the device is processing another command on the bus), the device requests service by setting
SERV to one. SERV shall remain set until all commands ready for service have been serviced. At com-
mand completion of the current command processing (i.e., when both BSY and DRQ are cleared to
zero), the device shall process interrupt pending and INTRQ per the protocol for the command being
completed. No additional interrupt shall occur due to other commands ready for service until after the
SERV bit of the device has been cleared to zero.

When the device receives a new command while queued commands are ready for service, the device
shall execute the new command and process interrupt pending and INTRQ per the protocol for the new
command. If the queued commands ready for service still exist at command completion of this command,
SERV remains set to one but no additional interrupt shall occur due to commands ready for service.

When queuing commands, the host shall disable interrupts via the nIEN bit before writing a new com-
mand to the Command register and may re-enable interrupts after writing the command. When reading
status at command completion of a command, the host shall check the SERV bit since the SERV bit may
be set because the device is ready for service associated with another queued command. The host
receives no additional interrupt to indicate that a queued command is ready for service.

Deskstar 40GV & 75GXP hard disk drive specifications

79

Содержание DTLA-305040 - Deskstar 41.1 GB Hard Drive





















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DTLA-305040 - Deskstar 41.1 GB Hard Drive

Falcon 165 Instructions For Assembly preview
165
Бренд: Falcon Страницы: 19
IBM Deskstar 40GV Installation And Reference Manual preview
Deskstar 40GV
Бренд: IBM Страницы: 66
SanDisk Mobile Ultra Memory Stick Micro User Manual preview
Mobile Ultra Memory Stick Micro
Бренд: SanDisk Страницы: 1
German pool auto-vacuum VAC-20 Operating Instructions Manual preview
auto-vacuum VAC-20
Бренд: German pool Страницы: 16
Linksys NAS200 User Manual preview
NAS200
Бренд: Linksys Страницы: 43
ABSCO SHEDS 30082SECOK Manual preview
30082SECOK
Бренд: ABSCO SHEDS Страницы: 23
Qualstar HP9000 Quick Start Manual preview
HP9000
Бренд: Qualstar Страницы: 8
Archos ARCFlash User Manual preview
ARCFlash
Бренд: Archos Страницы: 12
Security + Stack On GC-500-5 Installation Instructions Manual preview
Stack On GC-500-5
Бренд: Security + Страницы: 12
Segger embOS-MPU Manual preview
embOS-MPU
Бренд: Segger Страницы: 56
Husky H27CH6MS Use And Care Manual preview
H27CH6MS
Бренд: Husky Страницы: 14
DataDirect Networks StorageScaler 2460 Installation And User Manual preview
StorageScaler 2460
Бренд: DataDirect Networks Страницы: 46
DataDirect Networks SFA12K-20 Installation & Configuration Manual preview
SFA12K-20
Бренд: DataDirect Networks Страницы: 106
HP A2W75-67905 Manual preview
A2W75-67905
Бренд: HP Страницы: 32
HP A3542A User Manual preview
A3542A
Бренд: HP Страницы: 44
HP 8505 User Manual preview
8505
Бренд: HP Страницы: 45
HP 3PAR HP-UX 11i v2 Implementation Manual preview
3PAR HP-UX 11i v2
Бренд: HP Страницы: 48
HP C1520H User Manual preview
C1520H
Бренд: HP Страницы: 70

Бренды по названию

Популярные бренды

Загрузить еще бренды