IBM DS8000 - ADDITIONAL INFORMATION, Руководство пользователя, Страница: 184 / 250

Table 4. Failover and failback implementation (continued)
Step Operation
MC connectivity
required to
Format of source
volume and
target volume
Format of
source and
target
volume
pair Result: Site A Result: Site B
Disaster at
Site A
Failover Site B Volume B,
Volume A
Volume B1 :
Volume A1
Volume A1 ->
Volume B1
(Suspended)
The volume
pair might
display as full
or pending
duplex state if
host write
operations
have stopped.
Volume B1 ->
Volume A1
(Suspended)
2 (Site A volumes must be in a suspended state)
Return
production
to Site A
Failback Site A Volume A,
Volume B
Volume A1 :
Volume B1
Volume A1 ->
Volume B1
Volume A1 ->
Volume B1
3a (Site B volumes must be in a suspended state)
Return to
production
(Site B)
Note: If Site
A is still not
operational;
production
can
continue at
Site B.
Failback Site B Volume B,
Volume A
Volume B1 :
Volume A1
Volume B1 ->
Volume A1
Volume B1 ->
Volume A1
3b (prepare
to return to
production
(Site A)
from
production
(Site B)
Failover Site A Volume A,
Volume B
Volume A1:
Volume B1
Volume A1 ->
Volume B1
Volume B1 ->
Volume A1
(Suspended
state; the
volume pair
might display
full or pending
state if host
write operations
have stopped.)
3c (Site A volumes must be in a suspended state)
Return to
production -
Site A
Failback Site A Volume A,
Volume B
Volume A1:
Volume B1
Volume A1 ->
Volume B1
Volume A1 ->
Volume B1
Returning production to local site after planned outages
After restoring operations at Site B, you can schedule a failback operation to
synchronize data and to enable production to resume at your original site, Site A.
Before you run a failback operation, you must create paths from Site B to Site A
between the specific LSSs.
156
DS8000 User’s Guide