IBM DS3500, Инструкция по установке, использованию и обслуживанию

Страница: 51 / 193

CAUTION:
This product might contain one or more of the following devices: CD-ROM drive, DVD-ROM drive,
DVD-RAM drive, or laser module, which are Class 1 laser products. Note the following information:
v
Do not remove the covers. Removing the covers of the laser product could result in exposure to
hazardous laser radiation. There are no serviceable parts inside the device.
v
Use of the controls or adjustments or performance of procedures other than those specified herein
might result in hazardous radiation exposure.
(C026)
CAUTION:
Data processing environments can contain equipment transmitting on system links with laser modules
that operate at greater than Class 1 power levels. For this reason, never look into the end of an optical
fiber cable or open receptacle. (C027)
Attention: When you handle static-sensitive devices, take precautions to avoid damage from static
electricity. For details about handling static-sensitive devices, see “Handling static-sensitive devices” on
page 2-3.
To install an SFP module, complete the following steps:
1.
Remove the SFP module from its static-protective package.
2. Remove the protective cap from the SFP module, as shown in Figure 3-8. Save the protective cap for
future use.
3. Remove the protective cap from the SFP port. Save the protective cap for future use.
4. Insert the SFP module into the host port until it clicks into place. See Figure 3-9 on page 3-8.
Protective cap
SFP module
Plastic tab
Figure 3-8. SFP module and protective cap
Chapter 3. Cabling the storage subsystem and storage enclosure
3-7