Step 7b: Custom install
If you do not wish to use Ontrack® Disk Manager, or if your system will install the drive without the
overlay program, continue by checking your drive’s settings in your BIOS.
BIOS settings
Begin by checking the CMOS settings. The example below is an Award© BIOS version 4.51. Other
BIOSs should be similar. Follow the instructions provided with your system. To enter the CMOS setup
screen press the key sequence designated by your system manufacturer (i.e. <F1>; <DELETE> <ESC>;
<CTRL> <ALT> <S>) during the initial boot process. Select “Standard CMOS Setup”. This selection will
bring up the following screen.
IBM storage products
Page 16
IBM Hard Disk Drive Technical Support Center version 1.0
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
HDD LOW LEVEL FORMAT
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item (Shift)F2: Change Color
F10 Save & Exit Setup
Time, Date, Hard Disk Type...
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ROM PC/ISA BIOS (2A5IHROB)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.