
Step 5: Connectors
After the drive has been carefully mounted, connect the IDE cable (included) and the power cable to the
drive. If you are using a cable already installed in your computer, ensure that the cable length does not
exceed 18 inches (45.7 cm). (Note that the IDE connector and power connector are keyed for proper
insertion.)
Connector locations
Step 6: Complete physical installation
Plug the cable into the onboard port. If you have added an Ultra ATA/66 controller card plug the cable
into the controller. The figure below shows the possible location of the onboard ports. Each port is
marked on the motherboard.
IBM storage products
Page 12
IBM Hard Disk Drive Technical Support Center version 1.0
Interface Connector
Power Connector
Jumper Block