IBM Cognos Скачать руководство пользователя страница 282 | Manualshive

Страница: 282 / 411

IBM Cognos Скачать руководство пользователя страница 282

Procedure

1.

If your data source is an .iqd file and you have IBM Cognos Impromptu
installed, you can resolve the problem in the source file. Change the data
definition for the column using the

string-to-number

function, save the .iqd

file, and then use Cognos Transformer to replace the faulty column.

2.

For non-IQD sources, you must change the data type for the column in your
source database.

TR0613

Column column_name is referenced by name in one or more dimensions, levels,
measures or currency tables. Deleting or modifying the column name can cause
these associations to be lost. Do you want to continue?

You have tried to delete a column that is currently being used in the model.
Deleting a column that provides category or measure values will cause the objects
in the model to lose their association with any source column.

Procedure

To avoid this problem, do not delete any columns required by your model.

TR0621

An association was expected but not found. Either you have referred to an
association by an object name or object identifier that Cognos Transformer is
unable to locate, or you have not referenced the association.

This error occurs when an MDL script requires an object and is unable to find it. In
this case, the object is an association.

The problem may be that the association was not referenced, or that it was
referenced with an incorrect object name or object identifier.

Procedure

You can verify Cognos Transformer object names and identifiers on the Windows
interface. To make them visible, select the

Object name

and

Object identifier

check boxes on the

Titles

tab of the

Preferences

property sheet. The object name

and identifier will appear in the title bar at the top of each property sheet, and also
in a tool tip when your pointer hovers over an object.
You can also find object identifiers in the .mdl file. For more information, see the
Cognos Transformer

Developer Guide

.

TR0623

One association_type association from datasource_name data source is already
defined.

A second

association_type

association from the same data source is not allowed.

This error occurs when you try to specify a second association of the same type for
the same data source.

268

IBM Cognos Transformer Version 10.1.1: User Guide

«
...
280
281
282
283
284
...
»

Содержание Cognos




























































































































































































































































































































































































































Отзывы:

Нет отзывов