IBM BladeCenter HC10 Type 7996, Инструкция по установке и эксплуатации, Страница: 44 / 74

– Processor summary
Select this choice to view the information about the microprocessor, including
the type, speed, and cache size.
v
System Information
Select this choice to view information about the blade workstation, such as the
version of the system BIOS code that is installed. When you make changes
through other choices in the Configuration/Setup Utility program, some of those
changes are reflected in the system information; you cannot change settings
directly in the system information.
This choice is on the full Configuration/Setup Utility menu only.
v
Devices and I/O Ports
Select this choice to view or change device assignments and input/output (I/O)
ports. You can select this choice to enable or disable the Ethernet controller.
Enable is the default setting for all controllers. If you disable a device, it cannot
be configured, and the operating system will not be able to detect it (this is
equivalent to disconnecting the device). If you disable the integrated Ethernet
controller, the computer will have no Ethernet capability.
This choice is on the full Configuration/Setup Utility menu only.
– Remote Console Redirection
Select this choice to enable and configure serial remote video and keyboard
redirection.
– System MAC Addresses
Select this choice to view the MAC addresses for network devices that are
installed in the blade workstation.
Note: This choice is available only if at least one Preboot Execution
Environment (PXE) option read only memory (ROM) starts during
POST.
– Video
Select this choice to view information about the video controller and memory.
v Date and Time
Select this choice to set the date and time, in 24-hour format
( hour : minute : second ).
This choice is on the full Configuration/Setup Utility menu only.
v
System Security
Select this choice to set password settings. See “Using passwords” on page 34
for more information about passwords. You can also enable the chassis-intrusion
detector to alert you each time the blade workstation cover is removed.
– Administrator Password
This choice is on the full Configuration/Setup Utility menu.
Select this choice to set or change an administrator password. An
administrator password is intended to be used by a system administrator; it
limits access to the full Configuration/Setup Utility menu. If an administrator
password is set, the full Configuration/Setup Utility menu is available only if
you type the administrator password at the password prompt.
– Power-on Password
Select this choice to set or change a power-on password.
32
BladeCenter HC10 Type 7996: Installation and User’s Guide