manualshive.com logo in svg

IBM Aptiva Series, Обслуживание оборудования

Поделиться
Скачать
IBM Aptiva Series Скачать руководство пользователя страница 23

1-4

Parts/Test Point Locations

This chapter contains system board layouts and jumper settings. It is useful
when you are asked to measure voltages. Use this information to help you
locate parts such as electronic boards, connectors, pin numbers, and test
points. This chapter also contains jumper settings for the hard disk drive, CD-
ROM (compact disc-read-only memory) drive, and the connector information
for Audio-I/O sound card and fax/modem adapter card.

Safety Inspection Guide

This chapter contains guidelines to help you identify possible safety concerns.
Use this information to inspect a machine for safety problems before putting
the machine under a Maintenance Agreement.

Parts Catalog

This catalog includes figures, part numbers, and part names for parts ordering
information use.

Part Number Index

This chapter contains part numbers listed in numerical order.

Содержание Aptiva Series















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды