IBM Aptiva Series Скачать руководство пользователя страница 113

Страница: 113 / 206

4-6

Cover

•

Disconnect the system unit power cord.

•

Release the lock that secures the cover at the back of the unit by pressing
it toward the unlocked icon.

•

Slip your hand underside the front panel and pull on the handle to fully
release the cover.

•

While still holding the handle, slide the cover forward to remove it
completely. The cover slides along grooves that run on the sides of the
unit.

•

Touch the bare metal frame of your system unit to dissipate the static
electricity from your body. Do not touch any of the components inside the
frame before you touch the frame. Do not touch any component with a
voltage warning label.

Figure 4- 2

Pull Out on the Cover

Содержание Aptiva Series















































































































































































































Результаты поиска

Содержание Aptiva Series

Отзывы:

Бренды по названию

Популярные бренды

IBM Aptiva Series, Обслуживание оборудования

Результаты поиска

Содержание Aptiva Series

Отзывы:

Бренды по названию

Популярные бренды