IBM Aptiva 2134 Скачать руководство пользователя

Страница: 73 / 266

Table

2-1 (Page 10 of 25). POST and Diagnostics and Utilities Index

for Symptoms, Messages, Error Codes, or Beeps

Symptoms, Messages, Error
Codes, or Beeps

Action/FRU

Pass (N) Drive Not Ready.
Diskette drive door is open or
defective.

Ensure diskette drive is ready.
Diskette Drive
System Board
Diskette Drive Cable

Pass (N): Drive (X) Write
Protected or Unformatted.

Insert a non-write protected, formatted
diskette into the diskette drive; then rerun
the test.
Diskette Drive
System Board
Diskette Drive Cable

Pass (N): Unknown Media Drive
(X).
Diskette Drive Test error.

Diskette
Diskette Drive
System Board
Diskette Drive Cable

Place Hi-density Media in Drive.
Media/drive mismatch.

Diskette
Diskette Drive
System Board
Diskette Drive Cable

Printer Failed.
Printer powered-on and ready?

Printer
Printer Cable
System Board

Printer Fault.
Printer powered on and ready?

Printer
Printer Cable
System Board

Printer Not Selected.
Ensure the printer is powered on
and ready.

Printer
Printer Cable
System Board

Printer problems.

Refer to the service manual for the printer.

Processor fan does not run when
the power supply fan runs.

With power-on, check the processor fan
connector J43 on Type A-1 system board
and connector J1 on Type A-2 system
board for +12 V dc.

Processor fan
System board

Processor speed seems slower.

“Memory” on page 2-38.

Cache memory
System board

Check Procedures

2-19

Содержание Aptiva 2134











































































































































































































































































Результаты поиска

Содержание Aptiva 2134

Отзывы:

Похожие инструкции для Aptiva 2134

Бренды по названию

Популярные бренды

IBM Aptiva 2134, Техническое обслуживание оборудования

Результаты поиска

Содержание Aptiva 2134

Отзывы:

Похожие инструкции для Aptiva 2134

Бренды по названию

Популярные бренды