IBM 9503DG1 - T 221 - 22.2" LCD Monitor, Руководство пользователя

Страница: 16 / 43

10
4. Press the power switch on the monitor. The power light comes on.
Notes:
a. When you turn off the monitor, wait at least five seconds before
turning it on again.
b. If you accidentally disconnected the power cord from the main outlet
and you connected it to the outlet again, the screen may flicker
continuously. To stop the flicker, press the power switch and turn off
the monitor, then turn it on again.
c. Refer to “Checking the operating status of your monitor” on page 16
for more information on the power light.
This completes the hardware setup.
When powering on the different units, power them on in the following
sequence:
1. Monitor
2. Peripheral
units
3. Personal computer or workstation
Power switch
Power light
Supplementary Information