IBM 9228 - IntelliStation Z - Pro, Руководство пользователя

Страница: 71 / 88

Replacing the side cover
To replace the side cover, complete the following steps:
1. Make sure that all cables, adapters, and other components are installed and
seated correctly and that you have removed all work tools or spare parts from
inside the computer.
2. Install the side cover by placing it into position on the computer. Insert the tabs
inside the cover into the slots on the chassis.
Note: Make sure that each tab on the side cover is in its corresponding slot
before closing the cover-release latch.
3. Close the cover-release latch to secure the side cover in place.
4. Lock the side cover, if you unlocked it during removal.
5. Reconnect the external cables and power cords to the computer; then, connect
the power cords to electrical outlets.
6. Turn on the attached devices; then, turn on the computer.
Connecting external options
You can connect a number of optional external devices to the connectors on the
rear and front of the computer.
To connect an external device, complete the following steps:
1. Read the safety information that begins on page v, the “Installation guidelines”
on page 29, and the documentation that comes with the device.
2. Turn off the computer and all attached devices (see “Turning off the computer”
on page 18).
Chapter 4. Installing options
59