IBM 9228 - IntelliStation Z - Pro, Руководство пользователя

Страница: 65 / 88

v
Terminator cards are not required for empty microprocessor sockets.
v If you must replace a microprocessor, see the Problem Determination and
Service Guide .
v
For additional illustrations of the system-board components, see “System board
option connectors” on page 32.
v
To order additional microprocessor options, contact your IBM marketing
representative or authorized reseller.
v For a list of supported microprocessor options for your computer, see
http://www.ibm.com/servers/eserver/serverproven/compat/us/iserver.html/.
The Microsoft Windows XP operating system that comes preinstalled on the
computer automatically configures itself when an additional microprocessor is
installed. Other operating systems might have to be manually configured to support
an additional microprocessor.
To install the microprocessor and fan sink, complete the following steps.
Orientation indicators
Fan-sink retention
lever
Microprocessor 2
Fan sink 2
VRM for microprocessor 2
1. Read the safety information that begins on page v and “Installation guidelines”
on page 29.
2. Turn off the computer and all attached devices (see “Turning off the computer”
on page 18); then, disconnect all power cords and external cables.
3. For easier access, lay the computer on its side.
4. Remove the side cover (see “Removing the side cover” on page 35).
5. Lift the power supply handle and rotate the power supply out of the chassis.
6. Press and hold the drive-cage release lever; then, rotate the drive cage
completely out of the chassis until the retaining tab on top of the cage locks
into place.
7. Disconnect any cables that impede access to the second fan sink and
microprocessor.
8. Locate the second microprocessor socket on the system board.
Chapter 4. Installing options
53