IBM 9008-22L Скачать руководство пользователя страница 47

Страница: 47 / 110

Identifying a part in a Linux system or logical partition

If the service aids have been installed on a system or logical partition, you can activate or deactivate the
indicator lights to locate a part or complete a service action.

Finding the location code of a part in a Linux system or logical partition:

Use this procedure to retrieve the location code of the part to perform service operations.

About this task

To find the location code of a part in a Linux system or logical partition, complete the following steps:

Procedure

At the command line, enter the command:

grep diagela /var/log/platform

Look for the most recent entry that contains a system reference code (SRC).

Record the location information.

Related information

Service and productivity tools for PowerLinux servers from IBM

IBM provides hardware diagnostic aids and productivity tools, and installation aids for Linux operating
systems on IBM Power Systems servers.

Activating the indicator light for a part by using the Linux operating system:

If you know the location code of a part, activate the indicator light to help locate the part while
performing service operations.

Procedure

At the command line, enter the command:

/usr/sbin/usysident -s identify -l location_code

This turns on the amber indicator LED for the part and the blue indicator LED on the system.

Look for the blue indicator LED on the system to identify the enclosure that contains the part.

Important:

A flashing amber LED indicates the location of the part and a solid amber LED indicates

that the part is failing.

Related information

Service and productivity tools for Linux on Power servers

IBM provides hardware diagnostic aids and productivity tools, and installation aids for Linux operating
systems on IBM Power Systems servers.

Identifying a part in a VIOS system or logical partition

Learn how to find the location code and identify a part by using the Virtual I/O Server (VIOS) tools.

Finding the location code of a part in a VIOS system or logical partition:

You can use Virtual I/O Server (VIOS) tools to find the location code of a part before you activate the
indicator light.

Common procedures for removing or replacing the system processor module

Содержание 9008-22L















































































































Результаты поиска

Содержание 9008-22L

Отзывы:

Похожие инструкции для 9008-22L

Бренды по названию

Популярные бренды

IBM 9008-22L, Руководство пользователя

Результаты поиска

Содержание 9008-22L

Отзывы:

Похожие инструкции для 9008-22L

Бренды по названию

Популярные бренды