IBM 88861TU, Руководство по планированию

Страница: 91 / 130

Table 19. BladeCenter LS41 blade server worksheet (continued)
Internal hard disk drive 1
h
36 GB SAS
h
73 GB SAS
h
146 GB SAS
h
15.8 GB Solid State
h
31.4 GB Solid State
Optional
Storage and I/O Expansion
blade 1
h
Multiprocessor
Expansion Unit
h
PCI I/O Expansion
Unit 3e
h
Storage and I/O
Expansion Blade
Optional
I/O Expansion option 1
h
Ethernet
h
Fibre Channel
h
SAS
Optional
BladeCenter S Types 7779 and 8886 installation worksheet
Use this worksheet to plan for the BladeCenter S system location in the rack and to
determine the rack weight.
When completed, the worksheet provides a total weight for up to six blade servers
in the BladeCenter S chassis. Each worksheet applies to one 8886 BladeCenter S
unit. Fill out a worksheet for each BladeCenter S chassis in the rack.
1. Before you can complete this worksheet, fill out an installation worksheet for
each blade server (1 to 6) that you plan to install in this chassis. See “Blade
server and workstation blade installation worksheet” on page 71.
2. Circle the 8886 BladeCenter S number and the BladeCenter S position in the
rack.
3.
Circle how many power modules are required for this BladeCenter S unit.
Note: Four power modules on four 220-volt ac circuits provide the most
power. See “Power consumption guidelines” on page 29 for more information
about component power consumption and how to provide redundant power.
4. Compute and record Subtotal 1 for the weight of these components.
5. For each blade server (1 through 6), record the weight numbers from the blade
server worksheets.
6. Compute and record Subtotal 2 for blade servers 1 through 6.
7. Record the subtotals for weight on the bottom of the worksheet. Add the
subtotals to derive the total weight for this BladeCenter S unit.
Note: The fully configured weight of a BladeCenter S system with blade servers is
approximately 108.86 kg (240 lbs).
Appendix A. Installation planning worksheets
85