IBM 8835 - Eserver 325 - 1 GB RAM, Руководство по установке опций, Страница: 48 / 62

Ethernet (RJ-45) connectors
The following illustration shows two Ethernet connectors.
1 1 8 8
Link LEDs
Activity LEDs
Connect Category 3, 4, or 5 unshielded twisted-pair cables to these connectors.
The 100BASE-TX and 1000BASE-T Fast Ethernet standards require Category 5 or
higher cabling.
For more information about the Ethernet controller, see the User’s Guide on the
IBM
Eserver
Documentation CD.
Serial connector
Use a serial connector to connect a serial device. The following illustration shows a
serial connector.
1 5
6 9
Universal Serial Bus connectors
Use a Universal Serial Bus (USB) connector to connect a USB device. USB
technology transfers data at up to 12 Mb per second (Mbps) with a maximum of
127 devices and a maximum signal distance of 5 meters (16 ft) per segment. Using
Plug and Play technology, USB devices are configured automatically. The following
illustration shows a USB connector.
4 3 2 1
Use a 4-pin cable to connect a device to a USB connector. If you need to connect
more USB devices than the server has USB connectors for, use a USB hub to
connect additional devices.
Video connector
Use this connector to connect a monitor to the server. The connector is dark blue to
help you identify it. The following illustration shows a video connector.
1 5
11 15
34
IBM
Eserver
325 Type 8835: Option Installation Guide