IBM 8677 - BladeCenter Rack-mountable - Power... Скачать руководство пользователя

Страница: 31 / 150

Chapter 2. Configuring your BladeCenter unit

The BladeCenter unit automatically detects the modules and blade servers that are
installed and stores the vital product data (VPD) information. When the BladeCenter
unit is started, it automatically configures the remote-management port on the
management module, so that you can configure and manage the BladeCenter unit
and blade servers. You configure and manage the BladeCenter unit remotely
through the management module using the Web-based user interface.

Note:

You can also configure the I/O modules directly through an external

I/O-module port using a Telnet interface or a Web browser. See the documentation
that comes with the I/O module for more information.

For the management module to communicate with the blade servers in the
BladeCenter unit, you will need to configure the IP addresses for the following
internal and external ports:

The external Ethernet (remote management) port on the management module
(see the

User's Guide

Command-Line Interface Reference Guide

for your

management module type for instructions). The initial management-module
autoconfiguration enables the network-management station to connect to the
management module to configure the port completely and to configure the rest of
the BladeCenter unit.

The internal Ethernet port on the management module for communication with
the I/O modules (see the

User's Guide

Command-Line Interface Reference

Guide

for your management module type for instructions).

The internal Ethernet management port on each I/O module for communication
with the management module. You configure this port by configuring the IP
address for the I/O module (see the

User's Guide

Command-Line Interface

Reference Guide

for your management module type for instructions).

Note:

Pass-thru modules have no internal Ethernet port.

To communicate with the blade servers for functions such as deploying an operating
system or application program, you also will need to configure at least one external
(in-band) port on an Ethernet switch module. See the

BladeCenter Management

Module User’s Guide

or the

BladeCenter Management Module Command-Line

Interface Reference Guide

for information about configuring external ports on I/O

modules.

Note:

If a pass-thru module is installed in I/O-module bay 1 or 2 (instead of an

Ethernet switch module), you will need to configure a port on the network switch to
which the pass-thru module is connected.

Management module and advanced management modules support different types
of remote access. See the documentation for your management module type for
information and instructions.

The Web-based user interface and command-line interface communicate with the
management and configuration programs that are part of the firmware that comes
with the management module. You can use these programs to perform tasks such
as:

Defining the login IDs and passwords

Selecting recipients for alert notification of specific events