IBM 7977E7U, Руководство пользователя

Страница: 61 / 108

Power-supply
cage assembly
Power-supply
cage handle
7. Lift the power-supply cage handle on the rear of the power-supply cage, and
rotate the power-supply cage out of the way until it latches in place. Let the
power-supply cage rest on the rear power-supply structure support bracket.
8. Install the transition duct on the edge of the DIMM air baffle.
Transition duct
DIMM air duct
Plastic
push pins
Positioning pins
Rivet
Pin
a. Remove the four screws that secure the DIMM air baffle to the
power-supply cage.
b. Push the DIMM air baffle toward the rear of the server until the positioning
pins on the DIMM air baffle are clear of the holes in the power-supply
cage.
c. Position the transition duct so that the two tabs are directly over the slots
on the side of the DIMM air baffle.
d. Slide the transition duct into the slots until it clicks into place.
9. Reinstall the DIMM air baffle onto the power-supply cage.
Chapter 2. Installing optional devices
47