IBM 7943, Руководство по диагностике и обслуживанию

Страница: 53 / 218

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 4, “Parts listing, System x3655, Type 7985 and 7943,” on page 93 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
00180xxx A PCI adapter requested a resource that is
not available.
1. See http://www.ibm.com/servers/eserver/support/
xseries/index.html and search for MIGR-61663 for
additional information on the error code.
2. Make sure that the BIOS code is at the latest
level.
3. Run the Configuration/Setup Utility program to
verify that the interrupt resource settings are
correct.
4. Reseat the failing adapter (if installed).
5. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Failing adapter
b. (Trained service technician only) System
board
012980xx Processor patch (microcode) missing.
1. Update the BIOS code.
2. (Trained service technician only) Reseat
microprocessor x.
3. (Trained service technician only) Replace the
microprocessor x.
012981xx Processor patch (microcode) update failed.
1. Update the BIOS code.
2. (Trained service technician only) Reseat
microprocessor x.
3. (Trained service technician only) Replace
microprocessor x.
01298200 Processor speed mismatch. Make sure that all microprocessors have the same
number of cores, cache size and type, clock speed,
and clock frequencies (see “Using the
Configuration/Setup Utility program” on page 168).
19990301 Hard disk sector error.
1. Reseat the hard disk drive.
2. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Hard disk drive
b. (Trained service technician only) System
board
Chapter 3. Diagnostics
35