IBM 7208 страница 3 Скачать руководство пользователя

Страница: 3 / 66

EDITION Edition Notice

First Edition (February 1998)

The following paragraph does not apply to any country where such provisions are inconsistent with local law.

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to

you.

Order publications through your IBM representative or the IBM branch office serving your locality. Publications are not stocked at the

address given below.

A reader's comment form is provided at the back of this publication. If the form has been removed, address your comments about this

book to:

IBM Corporation, Department 61C, 9000 South Rita Road, Tucson, Arizona 85744-0001, U.S.A.

When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any way it believes

appropriate without incurring any obligation to you.

¦ Copyright International Business Machines Corporation 1998.

All

rights reserved.

Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set

forth in GSA ADP Schedule Contract with IBM Corp.

7208 Tape Drive Setup and Operator Guide

Edition Notice

¦ Copyright IBM Corp. 1998

EDITION - 1

Содержание 7208



































































Результаты поиска

Содержание 7208

Отзывы:

Похожие инструкции для 7208

Бренды по названию

Популярные бренды

IBM 7208, Руководство по настройке и эксплуатации

Результаты поиска

Содержание 7208

Отзывы:

Похожие инструкции для 7208

Бренды по названию

Популярные бренды