2.1.6 Step 6. Performing a System Shutdown
Attention:
Do not attach the 7208 Tape Drive to an AS/400 system unit that is powered on. This can damage the 7208 Tape Drive, the
system unit, or both.
To perform a system shutdown of the AS/400, do the following:
Note:
Before doing a controlled shutdown of the system unit, notify other users who may be using the system.
__ 1. If it is on, do a controlled shutdown of the system unit (for instruction about doing a controlled shutdown, refer to your system
documentation).
__ 2. Turn off the power to all external devices connected to the system unit.
__ 3. Turn off the power to the system unit.
__ 4. Unplug the system unit power cable from the electrical outlet.
__ 5. Unplug the power cables to all external devices from their electrical outlets.
7208 Tape Drive Setup and Operator Guide
Step 6. Performing a System Shutdown
¦ Copyright IBM Corp. 1998
2.1.6 - 1
