Table 7. Fault Symptom Codes (FSC) and Error Recovery Procedure (ERP) Numbers (continued)
FSC
Description
ERP Number
Cause
DC
A parameter was out of range in the last LOG SELECT
or MODE SELECT command. The parameter was
rounded to a valid value and the operation was
completed.
7
T = 100%
DD
The drive is not ready. The head cannot locate the file
marks on the tape.
2
D = 50%
S = 50%
DF
A host error exists in the message system.
10
I
DE
The density specified is not supported.
2
D = 50%
S = 50%
E0
The command was aborted in the Command
Descriptor Block (CDB) phase (because of a parity or
other error), or a reconnect attempt failed after the
allowed number of retries.
12
B = 100%
E1
The operation was aborted prior to the Data phase
because of an incorrect message.
12
B = 100%
E2
The operation was aborted in the Data phase because
of an initialize error was detected.
12
B = 100%
E3
The operation was aborted in the Data phase because
of an incorrect message.
12
B = 100%
E4
The operation was aborted after the Data phase
because of an incorrect message.
12
B = 100%
E5
The operation was aborted after the Data phase
because of an unspecified error.
12
B = 100%
E6
An ABORT operation occurred which was caused by a
SCSI Bus Parity Error.
12
B = 100%
E7
An ABORT operation sent by the initiator has been
completed.
12
B = 100%
E8
The drive needs cleaning.
1
I
E9
Cleaning has occurred.
10
I
EA
An incorrect mode was specified for data compression.
2
D = 50%
S = 50%
EB
Download in progress.
3
D = 50%
S = 50%
EC
Log parameter overflow (recovered error).
10
I
ED
The tape history log indicates a worn tape; replace the
tape.
6
T=100%
EE
Service may be required.
12
D = 90%
T = 10%
F0
Tape alert async notification test.
10
I
F1
Tape alert async notification.
10
I
FA
The serial number is incorrect or blank.
12
D = 100%
FC
The head synchronization value in the EEPROM is out
of range.
12
D = 100%
Appendix B. Fault Symptom Codes
47
Содержание 7208 345
