![background image](http://html1.mh-extra.com/html/ibm/7208-345/7208-345_service-manual_608743041.webp)
Removing and Replacing the Drive
To remove the drive from the 7208 Tape Drive:
1.
Perform the cover removal procedure. Refer to “Removing and Replacing the
Cover” on page 26.
2.
Tilt the 7208 Tape Drive on its side. Support the drive (
1
in Figure 12) while
removing the four screws
2
that secure the drive to the chassis.
3.
Support the drive while returning the 7208 Tape Drive to its original position.
4.
Disconnect the power supply connector (J1)
3
from the drive.
5.
Disconnect the internal SCSI bus cable
4
from the drive.
Note:
To remove the cable, grasp the connector and pull it towards you. Do
not pull on the cable.
6.
Disconnect the internal SCSI address cable
5
from the drive.
7.
Slide the drive forward and out of the chassis.
Figure 12. Removing and Replacing the Drive
Chapter 4. Removal and Replacement Procedures
27
Содержание 7208 345
