IBM 7208 345, Руководство по обслуживанию

Страница: 13 / 68

About This Guide
This guide describes how to install and use the 7208 Model 345 8mm Tape Drive.
It contains the following chapters:
Chapter 1, “Reference Information,” describes the 7208 Tape Drive, gives the
system requirement, and lists hardware specifications.
Chapter 2, “Using the Media,” describes the media to use in the 7208 Tape Drive.
Chapter 3, “Maintenance Analysis Procedures,” describes a series of procedures
designed to evaluate and correct a problem with the 7208 Tape Drive.
Chapter 4, “Removal and Replacement Procedures,” describes the procedures to
follow when removing and replacing the field replaceable units (FRUs).
Chapter 5, “Parts Diagram and Parts List,” provides the parts diagram and parts
list required to service the 7208 Model 345 Tape Drive.
Appendix A, “Power Cables,” provides power cable information for different
countries.
Appendix B, “Fault Symptom Codes and Error Recovery Procedure Numbers,”
provides information about the error codes reported by the drive.
Appendix C, “Error Recovery Procedures,” provides information and recovery
procedures for resolving the error codes reported by the drive.
Store this guide with your system manuals.
Related Publications
v
7208 Model 345 8mm Tape Drive Setup and Operator Guide, SA26–2008, provides
installation and operating information for the 7208 Model 345 Tape Drive.
v
IBM Externally Attached Devices Safety Information, SA26-2004, provides
translations of danger notices.
© Copyright IBM Corp. 2000
xi