IBM 71P7285, Руководство пользователя

Страница: 16 / 121

3. Reinstall the computer cover.
4. Reconnect all external devices.
5. Plug all power cords into the wall outlets.
What to do next
If you will be using the drive as a data-only DVD-ROM drive, or as a
CD-ROM drive, you have completed the installation and do not need to install
support software. For more information on maintaining your drive, see “Care
and maintenance” on page 1-11.
Step 7. Setting up your computer for DVD video playback
This section provides instructions on enabling DMA settings so you can play
DVD movies with your DVD-ROM drive.
Enabling the DMA settings
Check the operating system for your computer. Instructions for enabling DMA
are included in “Appendix C. Customizing the device-driver configuration
settings” on page C-1.
1. Click Start, then click Settings, and then click Control Panel.
2. Double-click System.
Read the version number under System.
v
If your version number is 4.00.950B or 4.00.95C, follow the instructions
under “Changing the Auto Insert Notify and DMA parameters for
Windows 95, Windows 98, and Windows Me” on page C-1.
v
If your version number is 5.00.2195, follow the instructions under
“Changing the Windows 2000 DMA parameter setting” on page C-1.
v
If your version number is 4.00.1381, follow the instructions under
“Enabling DMA for Windows NT 4.0” on page C-2.
Step 8. Installing the MPEG Decoding Software
To install the MPEG-2 Decoding software do the following:
1. Close any programs that are running.
2. Insert the MPEG-2 decoding software CD into your DVD-ROM drive.
3. If the Installation window opens automatically, go to Step 8. Otherwise,
continue with Step 4.
4. Click Start.
5. Click Run.
6. Type X:\DVDPLAYR\SETUP.EXE, where X is the drive letter for your
DVD-ROM drive.
7.
Click OK.
8.
Follow the on-screen instructions to complete the installation.
1-8
IBM 16X Max RAM-Read DVD-ROM Drive: User’s Guide