IBM 628791U - PC 300 GL, Руководство пользователя

Страница: 103 / 176

did not make a change, go to the Important text box which follows
step 5d.
To use the Configuration/Setup Utility Program, do the following:
a. Select the menu item that is flagged (or that you wish to view) by
pressing Up Arrow (
↑
) or Down Arrow (
↓
), and then press Enter.
b. A new menu specific to the item that you selected appears. Press
Left Arrow (
←
) or Right Arrow (
→
) to toggle between choices for a
menu item. (Note that each menu item has a Help screen. To
view the Help screen, select the menu item, and then press F1.)
c. When you finish viewing and changing settings, press Esc to
return to the Configuration/Setup Utility Program menu.
d. Before you exit from the program, select Save Settings. When you
exit from the Configuration/Setup Utility Program menu (see step
5e), your operating system will start automatically (unless there is
an unresolved problem with the startup device).
Important
If you did not change any settings in the Configuration/Setup
Utility Program, note the following:
Ÿ
You will get an error message if you exit from the
Configuration/Setup Utility Program without selecting
Save Settings
. Your operating system will not start, but
the computer will automatically restart. When the
computer restarts, you will get a POST error message, and
then the Configuration/Setup Utility Program will again
start automatically.
Ÿ
You will not get an error message if you select Save
Settings
, and then exit from the Configuration/Setup
Utility Program. Your system saves all settings as they
currently appear in the Configuration/Setup Utility
Program and your operating system starts (unless there is
an unresolved problem with the startup device).
e. To exit the Configuration/Setup Utility Program, press Esc and
follow the instructions on the screen.
6. For more information about what caused an error message to appear
and what action to take, see the following chart.
Chapter 8. Troubleshooting
89