IBM 622138U - IntelliStation Z - Pro 6221, Руководство пользователя

Страница: 104 / 142

Monitor symptom Suggested action
Only the cursor appears. Call for service.
The monitor works when you
turn on the computer but goes
blank when you start some
application programs. Verify that:
v The application program is not setting a display mode higher than the capability
of the monitor.
v The primary monitor cable is connected to the video port or C2T device breakout
cable.
v You installed the necessary device drivers for the applications.
If the problem remains, call for service.
The screen is wavy, unreadable,
rolling, distorted, or has screen
jitter. If the monitor self-tests show the monitor is working properly, consider the location
of the monitor. Magnetic fields around other devices (such as transformers,
appliances, fluorescent lights, and other monitors) can cause screen jitter or wavy,
unreadable, rolling, or distorted screen images. If this happens, turn off the monitor.
(Moving a color monitor while it is turned on might cause screen discoloration.)
Then move the device and the monitor at least 305 mm (12 in.) apart. Turn on the
monitor.
Notes:
1. To prevent diskette drive read/write errors, be sure the distance between
monitors and diskette drives is at least 76 mm (3 in.).
2. Non-IBM monitor cables might cause unpredictable problems.
3. An enhanced monitor cable with additional shielding is available for the 9521
and 9527 monitors. For information about the enhanced monitor cable, contact
your IBM reseller or IBM marketing representative.
If the problem remains, call for service.
Wrong characters appear on the
screen. If the wrong language is displayed, update the BIOS code with the correct
language.
If the problem remains, call for service.
No video.
1. Make sure the correct machine is selected, if applicable.
2. Make sure all cables are locked down.
If the problem remains, call for service.
Option problems
Option symptom Suggested action
An IBM option that was just
installed does not work.
1. Verify that:
v The option is designed for the computer (For a list of supported options for
your computer, go to http://www.ibm.com/pc/ on the World Wide Web; then,
select your country and navigate to the list of options for your computer.).
v You followed the installation instructions that came with the option.
v
The option is installed correctly.
v You have not loosened any other installed options or cables.
v
You updated the configuration information in the Configuration/Setup Utility
program. Whenever memory or an option is changed, you must update the
configuration.
2. Replace the option you just installed.
If the problem remains, call for service.
82
IBM IntelliStation Z Pro Type 6221: User’s Guide