IBM 4810 33H, Инструкция по установке и обслуживанию, Страница: 25 / 60

Removing memory
1. Open the unit (see “Opening the unit” on page 2-2).
2. Disconnect the power and interface cables from the hard-disk drive.
3. On the DIMM to be removed, push the latches outward.
4. Lift the DIMM from the socket.
5. To replace the memory, reverse this procedure.
Figure 2-4. Removing memory
Updated May 20, 2008
Chapter 2. Remove/replace procedures for the 4810 SurePOS 300
2-7