IBM 4810 33H, Инструкция по установке и обслуживанию, Страница: 21 / 60

Removing the CD-ROM
To remove the CD-ROM:
1. Open the unit (see “Opening the unit” on page 2-2).
2. Disconnect the power and signal cables from the CD-ROM.
3. While pressing the blue latch toward the CD-ROM, lift the CD-ROM out.
4. While pulling the tab on the side of the CD-ROM bracket outward, pull the
bracket away from the CD-ROM.
To replace the CD-ROM:
1. Fit the two prongs on the non-latch side of the CD-ROM bracket into the holes
in the side of the CD-ROM.
2. Snap the CD-ROM into the CD-ROM bracket.
Figure 2-2. Removing the CD-ROM
Updated May 20, 2008
Chapter 2. Remove/replace procedures for the 4810 SurePOS 300
2-3