IBM 4693, Инструкция по установке и эксплуатации, Страница: 57 / 74

Created February 23, 1997
Additional Forms for Point-of-Sale Printer Model 2
The use of printed forms at the document insert station is optional. The following specifications apply to
forms that may be used at the document insert station:
Table A-3. Specifications for Document Insert Forms used in the Model 2 Printer
Form Type Specifications
Single-part form 216 mm x 330 mm (8.5 in. x 13 in.) is the recommended maximum.
69.9 mm x 152.4 mm (2.75 in. x 6 in.) is the recommended minimum.
69.9 mm x 82.5 mm (2.75 in. x 3.25 in.) is the minimum single-part form that can be used, but
it only allows approximately three (3) lines of printing.
Multi-part form 216 mm x 330 mm (8.5 in. x 13 in.) is the recommended maximum.
82.5 mm x 187.3 mm (3.25 in. x 7.37 in.) is the recommended minimum.
Tab card Size: 82.5 mm x 123.2 mm (3.25 in. x 4.85 in.)
Weight: 57 to 90 grams/m
²
(15 to 24 lb. paper or tab card stock
Thickness: 0.0762 mm (0.003 in.) paper to 0.2 mm (0.008 in.)
Ledger card stock maximum (uncoated card stock only)
Multi-part Forms for Point-of-Sale Printer Model 2:
Multi-part forms may be used in the
document insert station. The maximum form thickness is 0.47 mm (0.0185 in.).
Top fastening is recommended on all forms regardless of size. Fastening is permitted on the left side of
forms that are a minimum of 101.6 mm (4 in.) wide. Fastening on the right side is not permitted.
Fastening must not extend more than 19.05 mm (.75 in.) from the top, bottom, or left edge of a form.
When bottom fastening is used, printing must start at least 63.5 mm (2.5 in.) from the fastening to help
eliminate potential document feeding problems.
Note: No staples or metal inserts may be used on any area of the form that is inserted in the machine.
No holes or openings are allowed on the form or its fastening. Forms with pre-printed lines or boxes
located in areas to be printed can be used. However, the accuracy of printing between lines or in the
boxes depends on the positioning of the document by the operator.
Appendix A. Expendable Supplies and Replaceable Parts
A-3