IBM 4693, Инструкция по установке и эксплуатации, Страница: 42 / 74

Created February 23, 1997
Operating the Model 2 Point of Sale Printer
Note: Consult your store procedures for information on the correct method of operating the document
insert station.
The Model 2 printer has four buttons located on
the top of the printer. These buttons are used to:
III Advance paper at the journal station
II Advance paper at the customer receipt
station
I Open and close the document insert
station
T Test the printer
Three of the buttons are visible when the printer
cover is closed. The test button is visible only
when the printer cover is raised.
Opening/Closing the Document
Insert Station
The document insert station can be opened or
closed under application program control or it can
be operated manually using the document insert
button.
The document insert station is normally open and
ready for insertion of a document.
1
Insert the document. (The following sections
describe how to insert documents.)
2
Press the I button to manually close the
station.
Note: Pressing the I button is not
necessary if your printer has been
programmed to close the document insert
station automatically.
Test Button
Journal Advance Button
Customer Receipt Advance Button
Document Insert Button
Figure 2-11. Buttons on a Model 2 Printer
2-8
Installation and Operation for POS I/O Devices