IBM 4693, Инструкция по установке и эксплуатации, Страница: 21 / 74

Created February 23, 1997
Installing the Keyboard Filler Panel:
The keyboard filler panel is available on the
following models with a Sure Point Touch Screen:
4693, 4694 Models 041, 044, and on the Cash
Drawer I/O Integration Kit.
1
Place the filler so the slots in the front of
filler engage with tabs at the front edge of
system unit.
2
Make sure the side of the filler overlaps the
tabs on the side of the system unit.
3
Press in on the locking levers at the left side
of the integration kit so that its lugs engage
the filler. Check to be sure the locking lever
securely holds the filler to the integration kit.
Installing the Printer
1
Remove any packing material from inside or
under the printer.
2
Connect cable 7 at the bottom of the printer.
Route the cable through the center opening
and place the printer on the system unit.
3
Be sure the side of the printer overlaps the
tab on the side of system unit. On an
integrated unit pull out on the locking lever at
the left side of system unit. The printer is
installed. Install any other I/O devices at this
time, otherwise go to “Installing the System
Unit Rear Cover” on page 1-21.
Locking
Level
Tabs
Slots
Chapter 1. Installing Input/Output Devices
1-9