IBM 4610 SureMark GR3, Дополнение к руководству по программированию

Страница: 72 / 183

5.2.5 F7 - COMMAND BUFFER MANAGEMENT
This command is used to retrieve the last command issued of the command buffer.
-----------------------------------------------------------------------
BYTE BIT CONTENT TYPE LENGTH
0-1 1B66 - cmd prefix hex 2
2 F7 - Command Buffer Management hex 1
3 Cmd. Extension hex 1
00 = Retrieve Last Command
01 = Retrieve Previous Command
02 = Clear Command Buffer
-----------------------------------------------------------------------
Response for Command Buffer Management will be formatted as follows:
-----------------------------------------------------------------------
BYTE BYTE CONTENT TYPE LENGTH
RS-485 USB
0-8 Fiscal Unit Status hex 9
0-14 Fiscal Unit Status hex 15
9-128 Additional Information hex 120 (Note 1)
15-128 Additional Information hex 114 (Note 1)
-----------------------------------------------------------------------
Notes:
1. See response for the Additional Information.
Response for Additional Information will be formatted as follows:
-----------------------------------------------------------------------
BYTE BYTE CONTENT TYPE LENGTH
RS-485 USB
9 15 Type hex 1 (Note 1)
10 16 Command Data Length hex 1 (Note 2)
11 17 Additional Data Length hex 1 (Note 3 on page 73)
12 18 Command hex 1
Command Extension hex n0
Command Data hex n1
Additional Data hex n2 (Note 4 on page 73)
Fiscal Untit Status Executed Command hex n3 (Note 5 on page 73)
-----------------------------------------------------------------------
Notes:
1. Type:
•
0xFF = command retrieved
•
0xFE = there was a new command between F700 and F701
•
0x00 = no commands found
2. Command Data Length = 1 byte + n0 bytes + n1 bytes
where:
Page 72 of 183 — IBM 4610 SureMark Fiscal Printer Turkey - Models GR3/GR5/GB3/GB5 Programmin