IBM 4348, Руководство по установке

Страница: 33 / 90

Installing an optional tape drive
To install an optional tape drive, complete the following steps:
1. Read the safety information that begins on page v and “Installation guidelines”
on page 7.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables.
3. Remove the side cover (see “Removing the side cover” on page 10).
4. Remove the bezel (see “Removing the bezel” on page 11).
5. Use your fingers to press in on the drive-bay filler panel release tab on the
inside of the bezel and remove it from the bezel; then, pry the EMC shield away
from the server. Store the filler panel and EMC shield in a safe place.
Release tab
Chapter 2. Installing optional devices
19