IBM 4348, Руководство по установке

Страница: 29 / 90

Installing a drive
Depending on the server model, one or more of the following drives might be
installed in the server:
v
Hard disk drive
v
DVD-ROM or DVD/RW
The server might come with an SATA attached DVD drive in bay 1 and a 3.5-inch
serial ATA (SATA) hard disk drive in bay 4.
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
The following notes describe the types of drives that the server supports and other
information that you must consider when you install removable-media and hard disk
drives:
v
Read the documentation that comes with the drive and make sure that you have
all the cables and other equipment specified in the documentation that comes
with the drive.
v
The server supports a maximum configuration of two hard disk drives, four
DIMMs, and one 5.25-inch device; or one hard disk drive, four DIMMs, and two
5.25-inch devices; or two hard disk drives, two DIMMS, and two 5.25-inch
devices.
v External tape drives, DVD-ROM, and DVD/RW drives are examples of
removable-media drives. You can install removable-media drives in bays 1, 2,
and 3 only.
v
You can install only an optional external USB diskette drive in bay 3. Other drives
are not supported in bay 3.
v
You can install SATA hard disk drives in bays 4 and 5 only.
Chapter 2. Installing optional devices
15