23
P
ARTICULATE CONTAMINATION
Attention:
Airborne particulates (including metal flakes or particles) and reactive gases acting alone or in
combination with other environmental factors such as humidity or temperature might pose a risk to the device
that is described in this document. Risks that are posed by the presence of excessive particulate levels or
concentrations of harmful gases include damage that might cause the device to malfunction or cease functioning
altogether. This specification sets forth limits for particulates and gases that are intended to avoid such damage.
The limits must not be viewed or used as definitive limits, because numerous other factors, such as temperature
or moisture content of the air, can influence the impact of particulates or environmental corrosives and gaseous
contaminant transfer. In the absence of specific limits that are set forth in this document, you must implement
practices that maintain particulate and gas levels that are consistent with the protection of human health and
safety. If IBM determines that the levels of particulates or gases in your environment have caused damage to the
device, IBM may condition provision of repair or replacement of devices or parts on implementation of
appropriate remedial measures to mitigate such environmental contamination. Implementation of such remedial
measures is a customer responsibility.
Table 1. Limits for particulates and gases
Contaminant
Limits
Particulate
•
The room air must be continuously filtered with 40% atmospheric dust spot efficiency (MERV 9)
according to ASHRAE Standard 52.2
1
.
•
Air that enters a data center must be filtered to 99.97% efficiency or greater, using high-efficiency
particulate air (HEPA) filters that meet MIL-STD-282.
•
The deliquescent relative humidity of the particulate contamination must be more than 60%
2
.
•
The room must be free of conductive contamination such as zinc whiskers.
Gaseous
•
Copper: Class G1 as per ANSI/ISA 71.04-1985
3
•
Silver: Corrosion rate of less than 300 Å in 30 days
1
ASHRAE 52.2-2008 -
Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by
Particle Size
. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
2
The deliquescent relative humidity of particulate contamination is the relative humidity at which the dust
absorbs enough water to become wet and promote ionic conduction.
3
ANSI/ISA-71.04-1985.
Environmental conditions for process measurement and control systems: Airborne
contaminants
. Instrument Society of America, Research Triangle Park, North Carolina, U.S.A.
