IBM 39M5657, Руководство пользователя

Страница: 83 / 120

Table 10. Supported TapeAlert Flags (continued)
Flag
Number
Flag
Parameter
(in hex)
Flag Description Action Required
37 25h Drive voltage Set when the drive detects that
the externally supplied voltages
are either approaching the
specified voltage limits or are
outside the voltage limits (see
“Physical Specifications” on page
69).
See error code 2 in “Error Codes
and Messages” on page 45.
39 27h Diagnostics required Set when the drive detects a
failure that requires diagnostics
to isolate the problem.
See error code 6 in “Error Codes
and Messages” on page 45.
51 33h Tape directory invalid
at unload
Set when the tape directory on
the tape cartridge that was
previously unloaded is
corrupted. The file-search
performance is degraded.
Rebuild the tape directory by
reading all the data
52 34h Tape system area
write failure
Set when the tape cartridge that
was previously unloaded could
not write its system area
successfully.
Copy the data to another tape
cartridge, then discard the old
cartridge.
53 35h Tape system area read
failure
Set when the tape system area
could not be read successfully at
load time.
Copy the data to another tape
cartridge, then discard the old
cartridge.
Appendix A. TapeAlert Flags
67